Activate


Need an Account?
Sign up!
Need an Account?
Sign up!
Ozobot BIT has 1040 bytes. Ozobot EVO 2048 bytes.
Experimental communiction via WebBLE.
It seems your browser does not support WebBLE technology.
You can download your OzoBlockly program as a binary file for Ozobot Evo.
Last uploaded: -
Calibration prepares your Evo and Bit for Flash Loading. You only need to calibrate once per session, before the first load.
Set your screen brightness to 100%
Place the bottom of your bot on the white calibration spot below.
Hold down the power button for 2 seconds until the top LED light blinks white. Then release the power button.
Calibration spot
Your bot will blink GREEN if calibration was successful. If your bot blinks RED, try again.
Loading transfers the program from the editor to your bot. To load the program, your bot’s color sensor needs to see the flashing colors on the loading spot.
Make sure your bot is turned on. If it is turned off, press the power button once.
Place the bottom of your bot on the loading spot directly on your screen.
Click on “Load Bit” or “Load Evo”.
Make sure your bot blinks GREEN until the progress bar shows loading is complete. If your bot turns RED, press CANCEL and try again.
BLE Loading is faster than Flash Loading, and is only an option with Evo. It is available only in select browsers (Chrome or Edge recommended).
BLE Loading uses Bluetooth® to transfer programs instantly to Evo. Make sure your Bluetooth® is on!
In the Editor, go to Programs
A new window will open in your browser. In the window, select your Evo and click “Pair”.
In Programs, click 'Run Program' and watch Evo go!
The new Bit+ robot can load programs through USB connection. This function is available only in compatible browsers (Chrome or Edge recommended).
Make sure your editor is switched to 'Bit+' mode.
In the Editor, go to Programs
A new window will open in your browser. In the window, select your Bit+ and click “Pair”.
In Programs, click 'Load Program' to load your program to your Bit+.
To run a program that you’ve loaded to your bot, place your bot on a table or desk and double-click the power button.
If you double click too slowly, you might accidentally turn your bot off. If you double click too fast, bot might only sense 1 click. Timing is everything!
Tip: To run again, tap "Run Program" once more. You can also double-click Evo's Power Button to run the last program loaded (even when Evo isn't connected to the App).
Click on any of the categories in the left menu, then drag and drop blocks into the workspace.
TIPS:Modify properties of most blocks by clicking and selecting new options.
For example, change LED Colors:Note that when dragging a block, any blocks connected below your block will also move.
Separate the block you want to delete from rest below it by grabbing the block below the one you want to delete and return the rest back to where they belong.
Now you can move the block into the trash.
Tip: The last 6 digits of a Share url are a unique Share Code! If you are on a tablet and only have the shared url, then you can still open the program by using its last 6 digits.
To share a program, you need to get the shared url or the share code. In Programs,
Tip: The last 6 digits of a Share url are a unique Share Code! If you are on a tablet and only have the shared url, then you can still open the program by using its last 6 digits.
To update your Evo in Ozobot Blockly, go to Programs
To check for optional updates, press the Info button in the lower right corner.
If an update is available, you will see a red button that opens the update dialog.Unsupported browser:
(unknown browser name) (v. undefined)
Please download the most recent Chrome browser for best experience with OzoBlockly. You can proceed using your current browser, but some features may be limited.